The stock car battery accessory looks great… but it does nothing.

This upgraded replacement turns that prop into a real working power source—so your Mark 42 can be powered directly from the battery in-hand, with a slim USB-C plug routed cleanly to the back (as shown in the photos).

It’s perfect for wireless photography, “battery-carry” poses, and enclosed display cabinets where you don’t have an easy way to run power from the outside.

Key Features

✅ Dual Power Options (Battery OR Direct USB)

• Real internal battery (200mAh) – Built-in rechargeable cell lets you power the figure without needing an external power source nearby.

• Included USB-A direct power cable – Plug in for continuous power when you want a set-and-forget display (no battery needed).

✅ Built-in Bluetooth Connectivity

• Bluetooth ready for wireless control/connection in your setup (feature built into the pack).

✅ Top ON/OFF SwitchQuick control right on the battery—turn the figure on/off without unplugging anything.

✅ Hidden USB-C Charging Port (Under the Battery)Charge from the underside to keep the prop look clean from every angle.

✅ Slim USB-C Output Plug + Clean Wire RoutingDesigned to route neatly toward the back for a tidy display and easier posing.

✅ Improved Grip Version (Fits All 4 Fingers)Modified shape allows a more natural “carrying the battery” pose compared to the stock version.

✅ Display-Cabinet FriendlyGreat option for sealed/glass cabinets or photo setups with no nearby outlet.

What’s Included

• 1× Rechargeable Mark 42 (2.0) Car Battery Replacement (200mAh built-in + Bluetooth)

• 1× Slim USB-C output lead (pre-attached / ready to route)

• 1× USB-A direct power cable (wired power option)

Figure is not included.

How to Use

Battery Mode (Wireless / Carry Pose)

1. Switch OFF before connecting.

2. Route the cable neatly toward the back of the figure (avoid sharp bends/pinch points).

3. Plug the slim USB-C connector into your Mark 42 (2.0) power input.

4. Pose the hand and battery naturally (this version is shaped to fit all 4 fingers).

5. Flip the top switch ON to power the figure.

Direct USB Mode (Continuous Display Power)

1. Connect the USB-A direct power cable to a standard 5V USB power source.

2. Route the cable cleanly and avoid pinch points.

3. Switch ON to run the figure directly from USB power.

Charging Notes

• Turn the switch OFF before charging.

• Plug a USB-C charging cable into the port underneath the battery.

• Use a standard 5V USB charger (avoid fast-charge / high-voltage chargers).

Safety & Care (Important)

• Display accessory only – not a toy.

• Keep away from children/pets.

• Do not expose to heat, water, or puncture/crush the battery.

• Stop using immediately if the battery shows swelling, damage, or abnormal heat.

• Ensure the cable is not pinched by armour panels or joints during posing.