Upgrade your Blitzway Ghostbusters Proton Pack with a clean, collector-friendly power solution made for display.
This Set 4 bundle includes four battery compartment inserts, each with its own individual USB-A power lead, so you can power multiple sections neatly without constantly swapping button batteries.
Why You’ll Want This
Display-Ready Power (No More Batteries)Swap the original batteries for stable USB power—ideal for shelves, photos, and long display sessions.
4 Independent Power InsertsEach insert is powered separately, giving you flexible cable routing and easy control.
Collector-Friendly FitmentDesigned to sit inside the original battery compartment for a tidy, reversible-style install.
What’s Included (Set 4)
4× Battery compartment inserts (Set 4)
4× Individual USB-A power leads (one per insert)
❌ Figure / Proton Pack not included.
Installation Guide (IMPORTANT)
Open the Proton Pack battery compartment(s) and remove the original batteries.
Insert each kit in the correct orientation:
✅ Correct Polarity (Critical)
Negative (–) = Bottom
Positive (+) = Top
✅ Positive Contact Alignment (Critical)
Very important: Align the side copper contact on the Positive (+) so it touches the side metal contact inside the compartment. If the copper side isn’t making firm contact, the insert may not power on.
Route each USB cable neatly and close the compartment carefully.
Plug each insert into a 5V USB power source and test.
Quick Troubleshoot:If a section doesn’t turn on, remove and re-seat the insert, making sure the positive copper side is firmly touching the compartment’s metal strip.
Power & Use Notes
Power input: 5V USB-A
Use a standard 5V USB wall adapter or power bank
Avoid “fast charge / multi-voltage” outputs if your adapter can switch modes
⚠️ DISCLAIMERS
Display Photos OnlyAny photos/videos showing the Proton Pack lit are for demonstration only.✅ This listing is for the kit set only.❌ Figure / props not included.
Compatibility NoteDesigned specifically for Blitzway Ghostbusters Proton Pack. Using it with other products may cause incorrect operation or damage.
Blitzway Ghostbusters Proton Pack — Kit Set 4 (USB Power Battery Inserts x4)
How to use:
- Insert the dummy into the battery compartment, connecting the red (+) and black (-) terminals.
- Place the dummy on the spring side at a 45-degree angle. Use flathead tools to gently push it down, then use your finger to push it all the way inside.
- Ensure that the light switch is turned on and that both metal contacts are touching.
- Do not swap USB cables among other kits unless they have a male USB port.
- Plug the USB cable into the power adaptor.
- Close the compartment with the cable lead next to the screw to create more space.
Warning and Safety Manual:
- Do not pull on the cable or remove, open, or unplug it frequently, as this may cause damage.
- Keep the device in a shaded or room-temperature environment.
- Avoid using exposed cables.
- Do not let the black and red wires touch each other.
- Do not use a fast-charging USB adaptor.
Safety Tips:
- This device is not intended for children under the age of 15 and should not be left unattended for extended periods.
- Only turn on the device when supervised, and it should be used for a maximum of 3 hours at a time.
- Stop using the device immediately if you notice any changes in the light colour, flashing LED, or if it does not turn on.
Troubleshooting:
- Ensure that all dummy cells are inserted and the switch is turned on before plugging in the power adaptor.
- If the compartment is closed too tightly, it may cause the dummy cells to pull out, so adjust the compartment as needed to ensure that the copper contacts are touching each other.
- Close the compartment with a gentle push, but do not apply excessive force, as this may damage the device.
Recommended:
- Power adaptor (5V, 2A output - not included)
- USB 2.0 cable
Note: The Mark 46 and Mark 47 models do not include a shoulder back light kit.
#Fusion_reactors
){kind=link}